DOOR LEAF CONSTRUCTION 

Leaf frame is made from oak tree dressing. Leaf filling consists of hollow core particle board reinforced with an inside plywood rail. A smooth or decoratively engraved thermal insulation panel is set in the leaf frame. In lower part of the leaf of an inside opening door there is a wooden eaves strip installed (as an option).

LEAF EDGE PROFILE 

Outside leaf rail is in leaf colour. Double leaf rebate is on three edges: two vertical and one upper horizontal.

FINISHING 

Door surface is protected with environmentally friendly waterbased exterior varnish.

Model 

Single leaf smooth or engraved, solid and glass ported.

ACCESSORIES included in the door price 

Four-point deadbolt strip lock made to fit two cylinders triple hinges with 3 plane adjustment using an allen key attached secure, anti- leverage bolt strip leaf seal all the way around metal

or wooden threshold in glass ported models, a safe, reflextinted glass kit is used door eaves strip door frame

ACCESSORIES to be charged additionally 

Hinge coverings door handle with plate upper escutcheon plate

LEAF SIZES 

Single leaf 90, 100.

RECOMMENDED DOOR FRAME 

Door frame is made from triple layer pine wood. Door frame profile: (68 x 81 mm)

NOTES: 

For exterior doors overhead canopy is recommended. In the case of the doors which open outwards, the canopy roof is obligatory.

Heat loss index values:

for solid door leaf U = 1,5 W/m2K,

for glass ported door leaf U = 1,6 W/m2K